Call Forwarding; Using Variable Call Forwarding - Siemens HiPath 3000 Operating Instructions Manual

Call Forwarding

Step by Step
Forwarding on?
1=all calls?
2=external calls only?
3=internal calls only?
:
or
US: Save?
UK: Save entry?
Forwarding off?
64
Call Forwarding

Using Variable Call Forwarding

You can immediately forward internal or external calls to
different internal or external telephones (destinations).
(External destinations require special configuration in
the system.)
Select and confirm.
or
F:
Enter the code.
Select and confirm.
or
or
or
; <
or Enter the code.
D
Enter the number of the telephone that is ringing.
Confirm.
Deactivating call forwarding:
Select and confirm.
or
G:
Enter the code.
Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 RSM (system networking via PC
network) Æ page 94!
When call forwarding is active, a special dial tone
sounds when you lift the handset.
If DID DTMF is active (contact your service per-
sonnel), you can also forward calls to this desti-
nation. Destinations: fax = 870, DID = 871,
fax DID = 872.