Using The Speakerphone; Enabling And Disabling Handsfree Answerback; Answering A Call With A Headset - Siemens HiPath 3000 Operating Instructions Manual

Making and Answering Calls
Step by Step
Mute off?
Mute
HF answerback on?
HF answerback off?
FB?
or
Answer?
Release
20

Using the Speakerphone

A colleague addresses you directly over the speaker
with a speaker call. You hear a tone before the an-
nouncement. The other party's name or station number
appears on the screen.
You can conduct the call with the handset or in speaker-
phone mode.
C
Lift the handset and answer the call.
or
Press the "OK" key to confirm your selection and answer
the call.
or
Press the key and answer the call.
Enabling and Disabling Handsfree
Answerback
Select and confirm.
or
or
GB?
Enter the code for "on" or "off".

Answering a Call With a Headset

Your telephone rings. Confirm.
Ending the call:
Press the key. The LED goes out.
Speakerphone mode is not available with
optiPoint 500 economy and optiPoint 500 basic.
If handsfree answerback is enabled (see below),
you do not need to switch on the microphone -
you can answer directly. You can answer immedi-
ately in speakerphone mode.
If handsfree answerback is disabled (default set-
ting), follow the procedure described above.
Placing a speaker call to a colleague Æ page 28.