5
Click Close.
Mutual authentication access restrictions by username and password
To set access restrictions using mutual authentication in addition to regular access restrictions, configure the settings as
shown below.
•
In the screen above, check "Mutual Authentication" and enter the password in the "Mutual Authentication Password"
field.
•
In the "User Authorization" screen displayed when the TeraStation is connected, select "Enable Mutual
Authentication".
•
The entry screen for the mutual authentication password is displayed again. Enter the password that was set.
•
If using the iSCSI Initiator included with Windows 7, Windows Vista, or Windows Server 2008, set the CHAP login
information performing searches and connections for targets.
Mutual authentication access restrictions by IP address
To set access restrictions by IP address, configure the settings as shown below.
Enable "IP Address Restrictions" in the screen above, enter the IP address where access is allowed in "IP Address List", and
click OK.
64