9
Go to Management - Name/Time/Language and configure the TeraStation's time and date.
Notes:
• For best results, use an NTP server to maintain the time settings on the TeraStation and other network devices.
Clocks for the network devices may run at slightly different speeds. If these devices get out of sync it may cause
network problems.
•
Buffalo Technology is not responsible for any loss or damage caused by using the ntp.jst.mfeed.ad.jp service or
service outages.
• If the TeraStation cannot automatically obtain the time from an NTP server, check its DNS settings. If the NTP
server is specified by a hostname instead of an IP address, make sure that a DNS server address is configured in
Network - IP Address.
10
To configure a RAID scan, click Drives and change the icon next to "RAID Scanning" from
11
.