Buffalo TeraStation 7000 User Manual page 61

Note:
If all the hard drives and RAID arrays are set to Enable LVM on Volume, the online updater cannot be used unless
there is at least one LVM volume.
4
The "Confirm Operation" screen will open. Enter the displayed number, then click OK.
5
Click OK.
6
Click iSCSI Volumes.
7
Change the icon next to "iSCSI" from
8
Click iSCSI.
9
Click Create Volume.
10
Choose a name, description, volume, and size, then click OK.
11
Click Close.
This completes the creation of the iSCSI volume.
Note:
Before use, connect the new volume and format the volume from within your OS.
.
61