Buffalo TeraStation 7000 User Manual page 63

3
Click the Security tab.
4
Click Edit.
5
Enable "Access Restrictions", enter the username and password, and click OK.
Note:
Access restrictions with mutual authentication
To use mutual authentication with access restrictions, configure the settings:
• In the screen shown above, check "Mutual Authentication" and enter the password in the "Mutual Authentication
Password" field.
• In the "User Authorization" window displayed when the TeraStation is connected, select "Enable Mutual Authenti-
cation" to connect. Enter the mutual authentication password.
• If using the iSCSI Initiator from Windows 7, Windows Vista, or Windows Server 2008, configure the CHAP login
information to allow searching for or connecting to targets.
6
Click Close.
7
Click Close.
This completes the settings of the access restrictions.
Setting Access Restrictions Volumes
1
In Settings, click Drives.
2
Click next to "iSCSI".
3
Click the volume where you want to set the access restrictions.
4
Enable "Access Restrictions", enter the username and password, then click OK.
63