Buffalo TeraStation 7000 User Manual page 156

5
Click the Time tab.
Click Use Local Date/Time to use your computer's time settings for the TeraStation.
By default, the TeraStation adjusts its clock automatically by using a default NTP server.
The default NTP server belongs to Internet Multi Feed Inc. For more information, visit www.jst.mfeed.ad.jp.
You can select a different NTP Server by clicking Name/Time/Language on the Management screen. The Name/Time/
Language screen opens.
• Click Time.
• Click Edit.
• Unclick Use Default NTP Server and enter a new NTP IP Address.
• Click OK.
If NTP is not used, enter the time and date manually. Click Use Local Date/Time to import the time and date from your
computer.
In certain cases, the DNS server address must be set in order to access the NTP server.
Note
The internal clocks of the TeraStation and other devices on your network may run at slightly different speeds. Over a
long period of time your network devices may show somewhat different times, which can cause network problems.
If clocks on your network vary by more than 5 minutes it may cause unexpected behavior. For best results, keep all
clocks on the network set to the same time by adjusting them regularly, or use an NTP server to correct them all
automatically.
156