Buffalo TeraStation 7000 User Manual page 49

• Usernames may contain up to 20 alphanumeric characters, hyphens (-), underscores (_), periods (.), !, #, &, @, $, *,
^, and %. Do not use a symbol as the first character.
• If the user ID is left blank, a user ID will be automatically assigned. Use numbers between 1000 and 1999 to set a
user ID manually. Make sure that user IDs are unique.
• If you log in with a username, you can check the TeraStation's name, IP address, workgroup, and drive status, and
you can change your own password.
• User descriptions may contain up to 75 alphanumeric characters, hyphens (-), underscores (_), and spaces. Do not
use a symbol or space as the first character.
• Up to 300 users with access privileges can be registered in the TeraStation.
• Passwords (include administrator) may contain up to 20 single-byte alphanumeric characters and the following
symbols: - _ @ ! # $ % & ' ( ) * + , . / ; < > = ? " ] ^ { } | ~. Do not use a symbol other than an underscore (_) as the first
character.
• The username and password on your TeraStation account should be the same as for your account in Windows.
• If the primary group was changed, the changes are not applied to quotas until the TeraStation is restarted.
4
Click Close.
5
Click Groups.
6
Click Add Group.
7
Enter the desired settings.
Notes:
• Group IDs may be between 1000 and 1999. Do not duplicate group IDs.
• Group names may contain up to 20 alphanumeric characters, hyphens (-), underscores (_), and periods (.). Do not
use a symbol other than an underscore (_) as the first character.
• Group descriptions may contain up to 75 alphanumeric characters, hyphens (-), underscores (_), and spaces. Do
not use a symbol or space as the first character.
• You may register up to 300 groups with the TeraStation.
8
Click a user you added under "Username".
49