Table of Contents
Advertisement
1-3
Server Chassis Features
The following is a general outline of the main features of the SC827B-(R)1400B 2U
chassis. Details on the chassis can be found in Chapter 6.
System Power
When confi gured as a SuperServer 6026TT-BT(R)F/BIBX(R)F/BIBQ(R)F, the
SC827B-(R)1400B includes a single 1400W power supply, which provides power
to all four serverboards (nodes). An additional 1400W power supply module (not
included) may be installed to provide redundant power.
SATA Subsystem
The SC827B-(R)1400B chassis was designed to support twelve SATA hard drives,
which are hot-swappable units.
Control Panel
The SC827B-(R)1400B features four independant control panels associated with
each serverboard (node) in the chassis. Each control panel has LEDs to indicate
power on, network activity, power fail, fan fail and system overheat conditions. Each
control panel also includes a main power button and a UID button.
Rear I/O Panel
The SC827B-(R)1400B is a 2U rackmount chassis. Its I/O panel provides a slots for
four low-profi le PCI Express x16 expansion cards, four COM ports, eight USB ports,
four VGA ports and eight Gb Ethernet ports. See Chapter 6 for details.
Cooling System
The SC827B-(R)1400B chassis has an innovative cooling design that features four
8-cm high-performance fans. A fan speed control setting in BIOS allows fan speed
to be determined by system temperature. See Chapter 6 for details.
Chapter 1: Introduction
1-5
Advertisement
Table of Contents
