Adjusting Your Remote Assistant Settings; Changing Your Remote Assistant Speaker Volume; Enabling And Disabling Audio And Visual Alerts - Cochlear CR110 User Manual

Adjusting your remote assistant settings

You can change the following remote assistant settings to suit your
needs:
• Remote assistant speaker volume.
• Remote assistant audio and visual alerts.
• Remote assistant language.

Changing your remote assistant speaker volume

Your remote assistant allows you to change the volume of the sounds
associated with visual alerts and key presses.
To increase the speaker volume, press the lower right soft key from the
speaker volume screen. To decrease the volume, press the lower left soft
key.
Figure 56: Remote assistant speaker volume screen

Enabling and disabling audio and visual alerts

When your remote assistant visual alerts are enabled, an alert pops up
on your remote assistant display when there is a problem (e.g. when the
coil is off). You will also hear a sound.
If your remote assistant alerts are disabled, you will only see visual alerts
when you enter the processor status screen. To save battery power,
there are no visual alerts when your remote assistant is in standby
mode. The orange indicator light will fl ash when there is a problem,
even if visual alerts are disabled.
To enable alerts, press the lower right soft key from the audio and visual
alerts screen. To disable alerts, press the lower left soft key.
© Cochlear Limited 2010
Adjusting settings
CR110 User Guide - 51