Cochlear CR110 User Manual page 16

Getting started
To recharge your remote assistant battery using the CP800 Series
Battery Charger and the CR100 Series USB Cable:
1. Connect the CR100 Series
USB Cable to the USB socket
at the base of the remote
assistant.
2. Connect the other end of
the CR100 Series USB Cable
to the CP800 Series Battery
Charger.
3. Connect the CP800 Series
Battery Charger to the
CP800 Series Global Power
Adaptor.
4. Connect the CP800 Series
Global Power Adaptor to a
mains power outlet.
When the CR100 Series USB Cable is fi rst plugged into the CP800
Series Battery Charger, a battery charging animation will appear on your
remote assistant display.
16 - CR110 User Guide © Cochlear Limited 2010