Cochlear CR110 User Manual page 23

The coil check and pair screen displays.
3. Press the lower right soft key to pair your remote assistant. On
successful pairing, you will see a confi rmation screen.
A green tick ( ) on the confi rmation screen indicates that the remote
assistant has been successfully paired with your processor. If your
processor is on the left side, a blue processor icon displays. If your
processor is on the right side, a red processor icon displays.
If using two processors (bilateral user), repeat steps 2 and 3 to pair your
second processor.
Once the remote assistant is paired, the Home screen displays.
If you pair a second processor to the same side, your remote
assistant unpairs your fi rst processor and pairs the second processor.
© Cochlear Limited 2010
+
Figure 13: Coil check and pair screen
Using your remote assistant
Pair
CR110 User Guide - 23