Dual Control Mode; Right Or Left Control Modes - Cochlear CR110 User Manual

Dual control mode

When you pair two processors, your remote assistant is automatically in
dual control mode.
In dual control mode, you can control both processors at the same time
to:
• Change programs.
• Change volume or sensitivity.
• Turn on the telecoil or Auto Telecoil.
• Connect an audio accessory.
To change these settings, both processors must be on and your remote
assistant must be within operating distance of your processors.
Changes to processor settings (e.g. changes to telecoil and microphone
mixing ratio) affect both processors, regardless of the control mode.

Right or left control modes

Sometimes you may want to change a setting on one processor only.
For example:
• Turn on the telecoil or Auto Telecoil on the left processor only.
• Change the volume or sensitivity on the right processor only.
© Cochlear Limited 2010
Bilateral control
CR110 User Guide - 41