Quick Guide to the CR110 Remote Assistant
Controlling your remote assistant
Unlocking remote assistant
Slide Keypad Lock/Unlock Slider up.
Locking remote assistant
Slide Keypad Lock/Unlock Slider down.
Switch on
Hold down the Cochlear Home Key for two seconds
(LONG hold).
Switch off
Hold down the Cochlear Home Key for two seconds
(LONG hold).
Change programme
Short press on relevant Softkey button.
• t o move programmes to 1/2/3/4 or SmartSound
labels: long press on top two Softkeys.
• t o move back: long press on top two Softkeys.
Change sensitivity
Short press on left or right silver button. Default =12
Change volume
Focus
Music
Focus
Music
Short press on up or down silver button. Default =10
Switch on Auto Telecoil
LONG press on Telecoil Toggle Button
(if enabled by clinic green "auto telecoil"
AUTO
Focus
Music
Noise
icon appears. If it then goes black the telecoil is on).
Everyday
Noise
Everyday
Select Telecoil
Short press on Telecoil Toggle Button, this
will switch on telecoil and a black telecoil icon
will appear in the screen.
Noise
Everyday
Switch off Telecoil/toggle away from accessory
Quick press on Telecoil Toggle Button and telecoil
will go off or accessory will go off.
To get back to the Home screen from anywhere use a quick press on the Cochlear Home Key.
To go to the Status screen and check processor is working, use a quick press on the Cochlear Home Key.
From here you can see if the processor battery is full and talk into the processor microphone
to check sound is going in.
To clear "Coil-Off" from the screen, quick press on the Cochlear Home Key.
Listen to the processor with the Freedom
and Freedom accessory adaptor.
™
To check the coil is transmitting, place on the back of the
remote assistant and watch the transmission icon.
listening earphones
™
Top Softkeys
Keypad Lock/Unlock Slider
Telecoil Toggle Button
Bottom Softkeys
Volume
Sensitivity
Cochlear Home Key / On & Off
Coil-Off
Processor battery
low
Processor battery
empty
?
Wrong coil
Remote Assistant
battery low
Fast processor LED flash
Slow processor LED flash
Steady processor LED
Implant ID
?
Cable fault, OR
disconnected
No sound
General fault
!
Remote Assistant
battery is charging