System Assembly; Necessary Tools - Cybernet i-One Series H5 User Manual

CYBERNET LCD-PC i-One Series H5

System Assembly

This chapter provides system assembly information and procedures. While performing
any installation, use a grounded wrist strap before handling computer components and
carefully follow all installation procedures. Static electricity may damage the
components.
This chapter will include instructions for how to install CPU, heat sink, memory modules,
hard disk drive (HDD), optical disk drive (ODD), and mini-PCIe card.

Necessary Tools

A Phillips screwdriver can be used to do most of the installation. One with
a magnetic head is recommended. Applied maximum torque is 5kg.
Pliers can be used as an auxiliary tool to connect some connectors or
cables.
Forceps/tweezers can be used to pick up tiny screws or set up the jumpers.
Rubber gloves can prevent injury from static charge.
Electric screwdriver can be used to secure all screws more quickly.
System Assembly Page 11