Installing The Memory Module Ddr3-So-Dimm - Cybernet i-One Series H5 User Manual

CYBERNET LCD-PC i-One Series H5

Installing the Memory Module DDR3-SO-DIMM

System Assembly
1. The memory module has only one
notch and will only fit in the slot
one way.
2. Insert the memory module into the
DIMM slot at a 45° angle. Then,
push it in until the golden finger on
the memory module is deeply
inserted in the DIMM slot.
3. Press the memory module down
and the metal clip at each side of
the DIMM slot will automatically
close.
4. Repeat the steps to install another
memory module to meet your
needs.
Page 17