Tv Output Setting - Sharp CD-SW250DVD Operation Manual

TV output setting

CD-SW250DVD
ENGLISH
E-23
SW250DVD_23-27_EN+ 23
Used to specify the colour system in accordance with the TV connected when
playing back an NTSC disc.
1
Whilst a disc is stopped, press the SET UP button whilst
pressing down the SHIFT button to display the setup
screen.
2
Use the cursor L or M button to select the "Display".
3
Press the ENTER button and
then use the cursor L or M
button to select "TV MODE".
4
Use the cursor 2 or 3 button to select "NTSC" or "PAL".
About the NTSC settings:
NTSC:
Select this setting when you have an NTSC TV or
an NTSC-compatible Multi-System TV connected
to the unit.
PAL:
Select this setting when you have a PAL TV
connected to the unit.
To exit the setup screen and return to the startup screen, press the SET
UP button whilst pressing down the SHIFT button or the RETURN button.
Notes:
I When you playback the PAL discs, either setting of "PAL" can be used on a
PAL TV or a Multi-System TV.
I This setting is disabled during play operation.
27/4/05, 3:47 PM
Display
TV TYPE: 4:3 LB
TV MODE: PAL
TV SCAN: INTERLACE
VOUT: CVBS/Y/C
OFFSET:
S3S
SELECT SAVE & QUIT SET UP