Recording To A Cassette Tape - Sharp CD-SW250DVD Operation Manual

Various tape function
H
Main unit
Function
Side A play-
back
Side B play-
back
Stop
Fast forward/
Fast rewind
Caution:
I To remove the cassette, press the H button, and then open the compartment.
I Before changing from one tape operation to another, press the H button.
I If a power failure occurs during tape operation, the tape head will remain
engaged with the tape and the cassette door will not open. In this case,
wait until the power is restored.
SW250DVD_58-63_EN+ 58
Operation
Remote
control
Press in the stop mode.
Press in the stop mode.
Press in the playback, fast
forward or fast rewind
mode.
Press in the playback or
stop mode.

Recording to a cassette tape

Before recording:
I When recording important selections, make a preliminary test to ensure
that the desired material is properly recorded.
I SHARP is not liable for damage or loss of your recording arising from
malfunction of this unit.
I The volume and sound controls can be adjusted with no effect on the
recorded signal (Variable Sound Monitor).
I For recording, use only normal tapes. Do not use metal or CrO
tapes.
Erase-prevention tab of cassette tapes:
I When recording on a cassette tape, make sure that the erase-prevention
tabs are not removed. Cassettes have removable tabs that prevent
accidental recording or erasing.
I To protect the recorded sound, remove the tab after recording. Cover
the tab hole with adhesive tape to record on the tape without the tab.
Side A
Tab for side A
Tab for side B
27/4/05, 11:04 AM
CD-SW250DVD
ENGLISH
2
E-58