Preparing To Watch A Dvd (Dvds) - Sharp CD-SW250DVD Operation Manual

Preparing to watch a DVD (DVDs)

5 -DISC
GHANGER
DV D MINI SYSTEM
CD-SW250DVD
X-BASS
(SURROUND)
/DEMO
SW250DVD_20-22_EN+ 22
VIDEO IN
S-VIDEO INPUT
To TV with external terminals
S-Video cable
Video cable
(commercially available)
(Supplied)
To watch DVD video images on the TV:
1
Turn on the TV.
2
Set the TV to "AV", "VIDEO", etc.
3
Turn on the unit and start play.
See page 33 for playing disc.
Note:
There is no audio signal supplied to the TV.
Loading a DVD (DVDs)
H
1
Press the ON/STAND-BY button to turn the power on.
2
Press the DVD/CD button.
3
Press the s 1 button and within 5 seconds, press the 7
OPEN/CLOSE button to open the disc tray 1.
4
Place the DVD on the disc tray 1, label side up.
I Be sure to place 8 cm (3") DVD(s) in the middle of the disc positions.
5
Press the 7 OPEN/CLOSE button to close the disc tray.
Caution:
I Do not place two discs in one disc tray.
I Do not play discs with special shapes (heart, octagon, etc.). It may cause
malfunctions.
I Do not push the disc tray whilst it is moving.
I If the power fails whilst the tray is open, wait until the power is restored.
I If the disc tray is stopped with force, "ER-CD20" will appear on the display
for 3 seconds and the unit will not function. If this occurs, press the ON/
STAND-BY button to enter the power stand-by mode and then turn the
power on again.
I If TV or radio interference occurs during CD operation, move the unit away
from the TV or radio.
I If a disc is damaged, dirty or loaded upside down, the disc will skip or not
play.
27/4/05, 3:53 PM
CD-SW250DVD
ENGLISH
12 cm (5")
8 cm (3")
E-22