Timer And Sleep Operation - Sharp CD-SW250DVD Operation Manual

Timer and sleep operation

Timer playback:
The unit turns on and plays the desired source (DVD, CD, tuner, tape) at the
preset time.
Timer recording:
The unit turns on and starts recording from the tuner at the preset time.
This unit has 2 types of timer: ONCE TIMER and DAILY TIMER.
Once timer:
Once timer play and once timer recording works for one
time only at a preset time.
For example, if you are away but want to record a programme on a radio
station.
Daily timer:
Daily timer play and daily timer recording works at the same
preset time everyday.
For example, set the timer to wake up every morning.
Using the once timer and daily timer in combination:
For example, use the once timer to record a radio programme, and use the
daily timer to wake up.
1. Set the daily timer (pages 64 - 66).
2. Set the once timer (pages 64 - 66).
1 minute or more
Daily timer
Start Stop
Note:
When set times for the daily timer and once timer overlap, the once timer takes
priority. Allow an interval of at least 1 minute between operations.
SW250DVD_64-69_EN+ 64
Timer playback or timer recording
H
Before setting timer:
1. Check that the clock is set to the correct time (refer to page 19). If it is
not set, you cannot use the timer function.
2. For timer playback:
Load a cassette or discs to be played.
For timer recording:
Load a cassette for recording in the cassette compartment.
Once timer
1
Press the ON/STAND-BY button to turn the power on.
Start Stop
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the 4 1 or ¡ ¢ button
to select "ONCE" or "DAILY", and press the MEMORY/SET
(MEMORY/DIMMER) button.
Set the unit to the correct time if "ONCE" or "DAILY" does not appear.
DVD MINI SYSTEM
CD-SW250DVD
X-BASS
(SURROUND)
/DEMO
AUTO REVERSE
1 MIC 2 MIC LEVEL
MIN MAX
]
Continued to the next page
27/4/05, 4:38 PM
CD-SW250DVD
ENGLISH
E-64