Programme Playback - Sharp CD-SW250DVD Operation Manual

Programme playback

CD-SW250DVD
ENGLISH
Chapter programmed playback
H
You can choose up to 32 favourite chapters for playback in the order you like
using this function. (Title cannot be programmed)
1
Whilst a disc is stopped,
press the MEMORY /
SET (MEMORY/DIMMER)
button to display the
programme screen.
2
Use the 0 - 9 button to
select the desired title
and then press the
ENTER button.
3
Use the 0 - 9 button to select the desired chapter
and then press the ENTER button.
I Selected chapter will be registered after ENTER is pressed.
I Repeat step 2 - 3 for another chapter.
I To clear the programmed chapter, press cursor 3 or 4 button to
select unwanted number in confirmation area and press the CLEAR
button.
4
Press the 0 button to start play.
Adding chapters into the programme:
Follow step 1 - 3, the new chapter number will be added after last number of
original programme.
To exit the programme input mode:
1. Whilst in the programme input mode, press MEMORY/SET (MEMORY/
DIMMER) button.
2. To clear all programme, press STOP button whilst in the programme input
mode.
E-41
SW250DVD_38-42_EN+ 41
Notes:
I Direct search button [1] to [0] can be used to select the title and chapter.
I Disc without title or chapter registered cannot be programmed.
I To continuous programme into same title or chapter, use direct search button
[1] to [0] to select and press ENTER button.
I Programme cannot be executed during playback or in pause mode.
I To discontinue the programme, press MEMORY/SET (MEMORY/DIMMER)
--
button.
I To play the same programme again, press MEMORY/SET (MEMORY/
DIMMER) button and then press PLAY button.
I Chapter from different title cannot be programme at the same time.
27/4/05, 10:59 AM