Sharp CD-SW250DVD Operation Manual page 136

Recording to a cassette tape (continued)
CD-SW250DVD
ENGLISH
E-61
SW250DVD_58-63_EN+ 61
DVD MINI SYSTEM
CD-SW250DVD
X-BASS
(SURROUND)
/DEMO
AUTO REVERSE
1 MIC 2 MIC LEVEL
MIN MAX
Recording from a CD (CDs)
H
You can record the desired CD using the CD DIRECT PLAY button.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the DVD/CD button.
3
Load a cassette into the TAPE 2 cassette compartment with
the side A facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
4
Press the ƒ button to choose one side or both sides.
© ... To record on both sides.
é
... To record on only one side.
5
Press the I6 button.
Recording will be paused.
6
Press one of the s 1 - s 5 buttons to select the desired
disc.
7
Within 5 seconds, press the CD DIRECT PLAY button to start
recording.
Will disappear after short whilst display
I Recording starts from side A.
I Recording is started from the selected CD. When the playback of
the last track is finished or the end of the tape is reached, the CD
and the cassette will stop automatically.
I CD playback will start approximately 7 seconds after the tape starts.
To stop recording:
Press the I button.
The CD and tape will stop.
27/4/05, 3:50 PM