Enhancing Your System - Sharp CD-SW250DVD Operation Manual

Enhancing your system

The connection lead is not included. Purchase a commercially available lead
as shown below.
GAME or VCR, DVD, etc.
To the line output sockets
White
Yellow
Red
Video cable
SW250DVD_64-69_EN+ 68
H
1.
2.
3.
DVD MINI SYSTEM 4.
CD-SW250DVD
5.
Note:
To prevent noise interference, place the unit away from the television.
AUTO REVERSE
Yellow White Red
1 MIC 2 MIC LEVEL
Auto power on function:
MIN MAX
When you press any of the following buttons, the unit turns on.
I GAME/VIDEO button (main unit and remote control): The unit turns on and
RCA lead I 0 button (main unit and remote control): The unit turns on and playback of
(not supplied)
H
1.
2.
3.
4.
DVD MINI SYSTEM
CD-SW250DVD
5.
X-BASS
(SURROUND)
/DEMO
H
I Before plugging in or unplugging the headphones, reduce the volume.
I Be sure your headphones have a 3.5 mm (1/8") diameter plug and are
AUTO REVERSE
1 MIC 2 MIC LEVEL
MIN MAX
I Plugging in the headphones disconnects the speakers automatically. Adjust
Listening to playback sounds of Game, VCR,
DVD, etc.
Connect a video game system, VCR, DVD, etc. to the front
GAME INPUT (VIDEO, AUDIO L and R) sockets.
Connect a TV to the rear VIDEO OUT socket.
Switch the TV input to auxiliary.
Press the ON/STAND-BY button to turn the power on.
Press the GAME/VIDEO button.
Play the connected equipment.
You can enjoy sounds from the supplied speakers and images on the TV.
"GAME" function is activated.
the last function starts (DVD/CD/TAPE/TUNER/GAME/VIDEO).
To record on a tape from Game, VCR etc.
Insert a cassette in the TAPE 2 cassette compartment.
Press the GAME/VIDEO button.
Press the I6 button.
Press the 0 or 1 button.
Play the game system, VCR, etc.
Headphones
between 16 ohms and 50 ohms impedance. The recommended impedance
is 32 ohms.
the volume using the VOLUME control.
27/4/05, 11:05 AM
CD-SW250DVD
ENGLISH
E-68