Tape Playback; Listening To A Cassette Tape (Tape 1) - Sharp CD-SW250DVD Operation Manual

Listening to a cassette tape (TAPE 1)

Before playback:
I For playback, use normal or low-noise tapes for the best
sound. (Metal or CrO tapes are not recommended.)
2
I Do not use C-120 tapes or poor-quality tapes, as they may
cause malfunctions.
I Before loading a tape into the cassette compartment, tighten
the slack with a pen or a pencil.
SW250DVD_56-57_EN+ 56
DVD MINI SYSTEM
CD-SW250DVD
X-BASS
(SURROUND)
/DEMO
AUTO REVERSE
1 MIC 2 MIC LEVEL
MIN MAX
To stop playback:
Press the H (H) button.
Note:
You cannot fast-forward or rewind the cassette in the TAPE 1 compartment.
Auto power on function:
When you press any of the following buttons, the unit turns on.
I TAPE (1 V 2) button (main unit and remote control): The unit turns on and
I 0 button (main unit and remote contro): The unit turns on and playback of

Tape playback

1
Press the ON/STAND-BY button to turn the power on.
2
Press the TAPE (1 V 2) button to select TAPE 1.
3
Open the cassette door by pushing the area marked "7".
4
Load a cassette into the TAPE 1
cassette compartment with the
side to be played facing towards
you.
5
Press the 0 button to start playback.
the "TAPE" function is activated.
the last function starts (DVD/CD/TAPE/TUNER/GAME/VIDEO).
27/4/05, 4:37 PM
CD-SW250DVD
ENGLISH
TAPE 1
E-56