Demonstration Mode - Sharp CD-SW250DVD Operation Manual

Setting the FM/AM span selector
H
The International Telecommunication Union (ITU) has established that member
countries should maintain either a 100 kHz or a 50 kHz interval between
broadcasting frequencies of FM stations and 10 kHz or 9 kHz for AM station.
The illustration shows the 50/9 kHz zones (regions 1 and 3), and the 100/10
kHz zone (region 2).
Before using the unit, set the SPAN SELECTOR switch (on the rear panel) to
the interval (span) of your area.
To change the tuning zone:
1. Press the ON/STAND-BY button to enter the stand-by mode.
2. Set the SPAN SELECTOR switch (on the rear panel) as follows.
I For 50 kHz FM interval (9 kHz in AM) → 50/9
I For 100 kHz FM interval (10 kHz in AM) → 100/10
3. Whilst pressing down the I6 button and the X-BASS (SURROUND)/DEMO
button, press the TUNING X button until "CLEAR AL" appears.
Caution:
This operation will erase all data stored in memory including clock, timer settings,
tuner preset, and CD programme.
SW250DVD_11-17 16
H
The first time the unit is plugged in, the unit
will enter the demonstration mode.
You will see words scroll and the subwoofer
will light up in flashing mode.
FM/AM(kHz)
SPAN
50/9
SELECTOR
100/10
To cancel the demonstration mode:
When the unit is in the power stand-by mode (demonstration mode), press the
X-BASS (SURROUND)/DEMO button. The demonstration mode will be
cancelled, the display will disappear and the subwoofer light up will be off.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS (SURROUND)/
DEMO button.
Note:
When the power is on, the X-BASS (SURROUND)/DEMO button can be used
to select the extra bass surround mode.

Demonstration mode

X-BASS (SURROUND)
(SURROUND)
/DEMO
5/13/05, 1:29 PM
CD-SW250DVD
X-BASS
/DEMO
16