Sharp CD-SW250DVD Operation Manual page 107

Setting Selectable parameters
(* indicates initial settings)
S-3D Sound
S3S Off*
Low
3
S S S Mid
High
VIRTUAL
VIRTUAL Off*
Low
Mid
High
Audio Processing
DRC MAX*
STD
MIN
Off
Initialise Yes*
No
DIT/DA Output Dolby Digital Stream*
PCM
DIT On*
Off
96KHz LPCM 96KHz*
48KHz
ENTER
Parental ____
PASSWORD
PARENTAL
Off*
LEVEL
1
. .
.
8
Description
A 3D sound can be set when playing a DVD recorded in Dolby Digital (multi channel) only.
Adjust to a suitable level.
Note: This function invalid when playing a Video CD/MP3/WMA/CD-DA disc.
Select a Virtual Surround System mode to get a virtual surround effects.
A Dynamic Range Control can be set when playing a DVD recorded in Dolby Digital (multi
channel) only. For other disc (CD-DA, VCD & MP3/WMA), it is fixed at MAX.
MAX: Dynamic Range Control set to maximum
STD: Dynamic Range Control set to standard
MIN: Dynamic Range Control set to minimum
Off: Dynamic Range Control not setting
The audio processing setting can be reset to a factory condition by pressing the ENTER
button.
Select a digital output signal format
Stream: Select this when connecting the unit to a Dolby Digital/DTS surround amplifier.
PCM: Select this to output in PCM format.
You can output a digital signal when playing a DVD/VCD/CD-DA discs.
The digital signal does not output.
If LPCM 48K is selected, PCM sound signals recorded at 96KHz are converted to 48KHz.
Set a 4 digit password to enter parental setting mode.
Set or change a parental setting level.
CD-SW250DVD
ENGLISH
E-32