Changing The Initial Setting Of Dvd - Sharp CD-SW250DVD Operation Manual

Changing the initial setting of DVD

CD-SW250DVD
ENGLISH
1. Whilst a disc is stopped, press the SET UP button whilst pressing down the SHIFT button to display the setup screen.
2. Use the cursor 3 or 4 button to select the following Menu.
3. Press the ENTER button and then use the cursor 3 or 4 button to select the item.
4. Press the cursor 1 or 2 button to adjust each item.
Setting
OSD
Language
AUDIO
SUBTITLE
DVD MENU
Display TV TYPE
TV MODE
TV SCAN
VOUT
OFFSET
E-31
Selectable parameters
(* indicates initial settings)
A language for screen display can be set, such as for initial settings or messages.
ENGLISH*
. .
.
SVENSKA
A language for audio can be set.
ENGLISH*
. .
You can specify a language for conversation and narration.
.
. DISC
A language for subtitle can be set.
ENGLISH*
. .
The subtitles are displayed in a specified language.
.
. DISC
A language for DVD menus can be set.
ENGLISH*
. .
Menu screens are displayed in a specified language.
.
. DISC
The screen mode should be set according to the connected TV type.
4:3 LB*
4:3 LB: Select this mode to view in letter box size on a normal screen TV.
4:3 PS
4:3 PS: Select this mode to view in pan scan size on a normal screen TV.
16:9
16:9: Select this mode to view on a wide screen TV.
PAL* Select the correct colour system (TV standard)
PAL : Select this mode for the PAL TV.
NTSC
NTSC: Select this mode for the NTSC TV.
Select a mode to optimise DVD or video CD images on a TV.
INTERLACE*
INTERLACE:
PROGRESSIVE
PROGRESSIVE: Select this for a progressive scan TV
Select the video output mode should be set according to the connected TV type.
CVBS/Y/C*
Pr/Y/Pb CVBS/Y/C:
Pr/Y/Pb:
The On Screen Display can be moved or shifted in 2 direction as below.
X : 39*
X-axis : 0-80
Y : 17*
Y-axis : 0-128
Description
Select this for a non-progressive scan TV
(use a video cable, S-video cable or component video cable)
(use a component video cable)
This function can be set when VOUT is set Pr/Y/Pb only.
Select this when the unit is connected to a TV with an S-video or video cable.
Select this when the unit is connected to a TV with a component video cable.