Preparing To Watch A Dvd (Dvds) - Sharp CD-G10000DVD Operation Manual

Preparing to watch a DVD (DVDs)

S-Video cable
(commercially available)
5 -DISC
GHANGER
DVD MINI SYSTEM
CD-G10000DVD
Connecting to TV
H
Besides the supplied video cable, you can use a commercially available S-
video cable to connect your system to television equipped with an S-video
input socket and enjoy viewing high-quality images on the TV screen. Be sure
to turn both the system and the TV equipment off before connecting them.
*CD-G10000DVD(EN)20-22 22
VIDEO IN
S-VIDEO INPUT
To TV with external terminals
Video cable
(Supplied)
To watch DVD video images on the TV:
1
Turn on the TV.
2
Set the TV to "AV", "VIDEO", etc.
3
Turn on the unit and start play.
See page 33 for playing disc.
Note:
There is no audio signal supplied to the TV.
Loading a DVD (DVDs)
H
1
Press the ON/STAND-BY button to turn the power on.
2
Press the DVD/CD button.
3
Press the s 1 button and within 5 seconds, press the OPEN/
CLOSE button to open the disc tray 1.
4
Place the DVD on the disc tray 1, label side up.
I Be sure to place 8 cm (3") DVD(s) in the middle of the disc positions.
5
Press the OPEN/CLOSE button to close the disc tray.
Caution:
I Do not place two discs in one disc tray.
I Do not play discs of special shapes (heart, octagon, etc.). It may cause
malfunctions.
I Do not push the disc tray whilst it is moving.
I If the power fails whilst the tray is open, wait until the power is restored.
I If the disc tray is stopped with force, "ER-CD20" will appear on the display
for 3 seconds and the unit will not function. If this occurs, press the ON/
STAND-BY button to enter the power stand-by mode and then turn the
power on again.
I If TV or radio interference occurs during CD operation, move the unit away
from the TV or radio.
I If a disc is damaged, dirty or loaded upside down, the disc will skip.
05.1.17, 10:47
CD-G10000DVD (S)
TINSZA160AWZZ
CD-G10000DVD
CP-G10000
ENGLISH
12 cm (5")
8 cm (3")
E-22
7