Timer And Sleep Operation - Sharp CD-MD3000H Operation Manual

Timer and Sleep Operation

Timer playback:
The unit turns on and plays the desired source (CD, MD, tuner, tape) at the
preset time. At the end time, the unit enters the power stand-by mode auto-
matically.
Timer recording:
The unit turns on and starts recording from the tuner at the preset time.
At the end time, the unit enters the power stand-by mode automatically.
Timer playback/Timer recording
Before setting the timer:
Whilst the power is in the stand-by mode, press the DISPLAY button
on the remote control to check that the clock is on time.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the MENU button.
3
Turn the jog dial to select "TIMER PLAY" or "TIMER REC" mode
and within 10 seconds, press the ENTER button.
For timer playback:
4
" PLAY" or " REC" will flash for 5 seconds.
Press the ENTER button during the flash.
or
5
Turn the jog dial to specify the hour to start and within 10 sec-
onds, press the ENTER button.
The illustrations show the timer playback setting.
Web-site: www.sharp.co.uk/support
For timer recording:
Continued to the next page
Help Line: 08705 274277 (office hours)
49