Tape Continuous Playback Button - Sharp GX-CD5200V Operation Manual

Listening to a cassette tape (TAPE 1 or TAPE 2) (continued)
GX-CD5200V
ENGLISH
■ Tape 1 playback (one side)
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TAPE (1
3
Open the cassette compartment by pushing the area
marked " ".
4
Load a cassette into the TAPE 1 cassette compartment
with the side to be played facing towards you.
5
Press the
playback.
■ Continuous playback (TAPE 2 to TAPE 1)
1
Press the area marked " " and load cassettes into the
TAPE 1 and TAPE 2 cassette compartments.
2
Press the TAPE (1
3
Press the CONTINUOUS PLAYBACK
4
Press the TAPE 1
● Playback begins from side A on TAPE 1, the playback se-
quence will be as follows:
TAPE 1 side A → TAPE 2 side A → TAPE 2 side B → stop
To stop playback:
Press the
To cancel continuous playback:
Press the CONTINUOUS PLAYBACK
indicator will disappear.
Note:
This function cannot be operated from TAPE 2.
E-31
Downloaded From Disc-Player.com Sharp Manuals
2) button to select TAPE 1.
button to start
Tape play indicator
2) button to select TAPE 1.
button.
button to start playback.
button.
button again and "
■ Tape 2 playback (two sides)
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TAPE (1 2) button to select TAPE 2.
3
Open the cassette compartment by pushing the area
marked " ".
4
Load a cassette into the TAPE 2 cassette compartment with
side A facing you.
5
Press the button on the remote control to choose one
side or both sides.
... To listen to both sides.
To play both sides ( ), start from side A. When play-
back starts from side B, side A will not be played.
...For endless repeat play of both sides.
...To listen to one side.
6
Press the button to listen to side A, or the
side B.
Forward play
To change the side of tape:
Press the or button during playback.
"
04/1/28 CX-GD5200V_EN2.fm
button for
Reverse play