Listening To Usb Mass Storage Device/Mp3 Player; Advanced Usb Playback - Sharp CP-BH250 Operation Manual

Listening to USB mass storage device/MP3 player

Note:
This product is not compatible with MTP and AAC file
systems from USB mass storage device or MP3 player.
■ To play back USB/MP3 player with folder
mode on / off
Press FUNCTION button repeatedly on the main unit
1
or USB button on the remote control to select USB
function. Connect the USB memory device that has
MP3 format files on the unit. When the USB memory
is connected to the main unit, the device information
will be displayed.
To playback with folder mode on, follow step 2 below.
To playback with folder mode off, skip to step 3 below.
Press the FOLDER button, and press the PRESET ( or
2
) button to select desired playback folder. To start play-
back, go to step 4. To change the playback folder, press
the PRESET ( or ) button to select another folder.
Select desired file to be played back by pressing the
3
button.
or
Press the / button. Playback will start and the file
4
name will be displayed.
● Title, Artist and Album name are displayed if they
are recorded in the USB memory device.
● Display content can be changed by pressing the
DISPLAY button.
Note:
To pause playback:
Press the / button.
■ To remove USB memory device
Press the button to stop playback.
1
Disconnect USB memory device from the USB terminal.
2
Notes:
● SHARP will not be held liable for the loss of data while the
USB memory device is connected to the audio system.
● Files compressed in MP3 format can be played back when
connected to the USB terminal.
● This USB memory's format supports FAT 16 or FAT 32.
● SHARP cannot guarantee that all USB memory devices will
work on this audio system.
● USB cable is not recommended for use in this audio system
to connect to USB memory device. Use of the USB cable will
affect the performance of this audio system.
RRMCGA409AWSA
E-14
● This USB memory cannot be operated via USB hub.
● The USB terminal in this unit is not intended for a PC
connection but is used for music streaming with a USB
memory device.
● External HDD-storage cannot be played back via USB
terminal.
● If the data inside the USB memory is large, it may take longer
time for the data to be read.
● This product will automatically detect the file type being
played. If unplayable file is played on this product, "NO
SUPPORT" is indicated and the file will be automatically
skipped. This will take a few seconds. If abnormal indications
appear on the display due to the unspecified file, turn off the
unit and then turn it on again.
● This product relates to USB mass storage devices and MP3
players. It may however face some irregularities due to
various unforeseen reasons from some devices. Should this
happen, turn off the unit and then turn it on again.
● MP3 player will not be charging in other than USB
function. However, charging ability depends on type of
MP3 player used.

Advanced USB playback

The following functions are the same as CD operations:
Various disc functions ...........................................................12
Repeat play ............................................................................12
Random play ..........................................................................12
Programmed play ..................................................................13
Notes:
● If USB memory device is not connected, "NO MEDIA" will be
shown on the display.
● Fast forward/reverse is invalid when playing back a variable
bitrate file.
Notes:
● This unit only supports "MPEG-1 Audio Layer-3" format.
(Sampling Frequency is 32, 44.1, 48kHz)
● Playback order for MP3 files may differ depending on the
writing software used during file download.
● Bitrate which is supported by MP3 is 32~320 kbps.
● Please put ".MP3" extension. Files cannot be played back if
there is no MP3 extension.
● Playlists are not supported on this unit.
● This unit can display Folder Name or File Name up to 32
characters.
● Maximum total number of MP3 files is 65025.
● Total number of folders read is 999 including folder with non
player files. However, the display shows only folder with MP3
files.
● The display playback time may not be displayed correctly
when playing back a variable bitrate file.
● The ID3TAG information supported are TITLE, ARTIST and
ALBUM only. Title name, artist name and album name can
be displayed by pressing the DISPLAY button during file
playback or pause mode.
Page