Before Operation; Setting The Clock - Sharp R-254M Operation Manual With Cookbook

Hide thumbs

Table Of Contents

Table of Contents

R-254M O/M + CkBk

13/3/01

Website: http://www.sharp.co.uk/support

Plug in the oven.

1. The oven display will flash:

2. Press the STOP/CLEAR key.

3. The display will show:

To set the clock, see below.

There are two setting modes: 12 hour clock and 24 hour clock.

1. To set the 12 hour clock, press the DELAY START/CLOCK SET key

once,

2. To set the 24 hour clock, press the DELAY START/CLOCK SET key

twice,

Example: To set the 24 hour clock to 23:35

1. Select the 24

hour clock.

DELAY START

KG / LB

CONVERSION

CLOCK SET

4. To enter the minutes press the

10 MIN key 3 times, then the

1 MIN key 5 times.

10min.

NOTES:

• To check the time of day during a cooking process, press DELAY START/CLOCK SET key and the time of day

will remain on the display as long as you keep your finger on the key. This does not affect the cooking process.

• If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock has

not been set, the display will only show

• If the electrical power supply to your microwave oven is interrupted, the display will intermittently show:

after the power is reinstated. If this occurs during cooking, the programme will be erased. The time

of day will also be erased.

• When you want to reset the time of day, follow the above example again.

11:12 am

Page 7

will appear in the display.

2. To enter the hours press the

10 MIN key twice, and

then the 1 MIN key 3 times.

10min.

5. To start the clock press

the DELAY START/

CLOCK SET key once.

KG / LB

KITCHEN

1min.

CONVERSION

TIMER

Help Line: 08705 274277 (office hours)