Table of Contents
Advertisement
Plug in the oven. The oven display will display: "0:00", an audible signal will sound once.
This model has a clock function and the oven uses less than 1.0 W in stand by mode. To set the clock, see below.
Your oven has a 24 hour clock mode.
1. Press the CLOCK
button
2. Press the time button and enter the current time. Enter the hours by pressing the 10 min.
the minutes by pressing the
3. Press the CLOCK
button
NOTES:
• If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock has not
been set, the display will only show "0:00" when cooking is complete.
• To check the time of day during a cooking process, press CLOCK
day for 2-3 seconds. This does not aff ect the cooking process.
• In the process of clock setting, if the STOP/CLEAR button is pressed or if there is no operation within 1 minute,
the oven will go back to the former setting.
• If the electrical power supply to your microwave oven is interrupted, the display will intermittently show "0:00"
after the power is reinstated. If this occurs during cooking, the programme will be erased. The time of day
will also be erased.
Power Level
Press the POWER LEVEL
button
HIGH
MEDIUM HIGH
MEDIUM
MEDIUM LOW
(DEFROST)
LOW
Generally the following recommendations apply:
100P/ 90P - (HIGH) used for fast cooking or reheating e.g. for
casseroles, hot beverages, vegetables etc.
80P/ 70P - (MEDIUM HIGH) used for longer cooking of dense
foods such as roast joints, meat loaf and plated meals, also for
sensitive dishes such as sponge cakes. At this reduced setting,
the food will be cooked evenly without over cooking at the sides.
60P/ 50P - (MEDIUM) for dense foods which require a long
cooking time when cooked conventionally, e.g. beef casserole,
once and "00:00" will fl ash.
時鍾
1 min. and 10 sec.
button.
to fi nish clock setting.
時鍾
MICROWAVE POWER LEVEL
Display
(Percentage)
微波
x1
100P
x2
90P
x3
80P
x4
70P
x5
60P
x6
50P
x7
40P
x8
30P
x9
20P
x10
10P
x11
0P
E-7
BEFORE OPERATION
SETTING THE CLOCK
button and
the LED will display the time of
• Your oven has 11 power levels, as shown.
• To change the power level for cooking, press
the POWER LEVEL button until the display
indicates the desired level. Press the time
button and enter the desired cooking time
Press the
START
• To check the power level during cooking,
press the POWER LEVEL
continues to count down although the display
will show the power level.
• If "0P" is selected, the oven will work with the fan
but no power. You can use this level to remove
odor.
it is advisable to use this power setting to ensure the meat will
be tender.
40P/ 30P - (MEDIUM LOW) to defrost, select this power
setting, to ensure that the dish defrosts evenly. This setting is
also ideal for simmering rice, pasta, dumplings and cooking
egg custard.
20P/ 10P - (LOW) For gentle defrosting, e.g. cream gateaux or
pastry.
button and enter
button to start the oven.
button. The oven
Advertisement
Table of Contents
