Sharp R-254M Operation Manual With Cookbook page 18

Table of Contents

Advertisement

R-254M O/M + CkBk
13/3/01
Website: http://www.sharp.co.uk/support
CONVENIENT FUNCTIONS
4. DELAY START:
DELAY START enables you to programme
the oven to cook at any time during the:
• next 12 hours (if the 12 hour clock is set).
• next 24 hours (if the 24 hour clock is set).
IMPORTANT: It is recommended the oven is
always attended when in use. Check to
ensure you have programmed the oven
correctly. Exceeding cooking times and use
of excessive power levels can lead to food
overheating and cause a risk of fire.
• You can use DELAY START only with manual
cooking.
• Before programming the oven, always check the
display is showing the correct time of day.
Example:
The current time of day is 1:00pm and you want to programme the oven to reheat a casserole on 50P for
40 minutes at 4:30pm. (In this example the oven is set to the 12 hour clock mode)
1. Enter the time at which you
want the casserole to begin
reheating by pressing the
TIME keys.
1min.
10sec.
KITCHEN
TIMER
x4
4. Enter the power level by
pressing the POWER
LEVEL key three times.
STOP
POWER
POWER
LEVEL
LEVEL
x3
11:12 am
Page 16
2. Press the DELAY START/
CLOCK SET key once to set
the start time for cooking.
DELAY START
KG / LB
CONVERSION
CLOCK SET
x3
5. Press the START/
AUTO MINUTE key to
start the programme.
STOP
START
START
AUTO MINUTE
CLEAR
CLEAR
AUTO MINUTE
Help Line: 08705 274277 (office hours)
• Once the oven is programmed for DELAY START
the display will flash between the time of day and
.
• If you press and hold the DELAY START/
CLOCK SET key, the DELAY START time will be
displayed until you release your finger from the
key.
• If you want to cancel a DELAY START programme,
press the STOP/CLEAR key.
• The DELAY START time can only be entered in
multiples of 10 minutes. It is not possible to enter
less than 10 minutes or any time which is not in
multiples of 10 minutes.
• If the door is opened after programming, close
the door and press the START/AUTO MINUTE
key to continue with DELAY START.
3. Enter the cooking time
by pressing the 10
MIN key four times.
x1
x1
16
10min.
x4
When the oven
starts at 4:30pm,
the preprogrammed
sequence will start.
The cooking time
will appear on the
display.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents