Call Service Errors - KIP STARPRINT 6000 User Giude

4. 4

Call Service Errors

You will note one of the following error codes on the Operation panel if the machine has a fatal
Error.
It is impossible for the user to cure these errors to resolve these issues.
PLEASE CALL YOUR TRAINED SERVICE PERSONNEL TO RESOLVE THESE ERRORS.
Error Code
E - 01
E - 02
E - 04
E - 06
E - 07
E - 14
E - 16
E - 21
E - 40
E - 41
E - 50
E - 51
If one of the above errors is displayed:
1) Turn off the printer, wait approximately 30 seconds, and then turn on the printer again.
2) If the same error code is displayed, turn off the printer, and then unplug the printer from the wall
outlet.
Call your service personnel.
Name of the error
Fuser Temperature Rising Error
Fuser Over Temperature Error
Developer Error
Counter Error
Cutter Error
Fuser Motor Error
Wire Cleaning Error
Fuser Thermostat Error
Folder Error
Key Card Error
Cassette Lift Error
High Voltage Power Error
4-17 Chapter 4 Error Indications and
Correction