Turning On The Printer; Basic Operations - KIP STARPRINT 6000 User Giude

2. 1

Turning on the Printer

1) Plug the printer into an exclusive wall outlet.
WARNING
(1) Do not handle the Power Plug with wet hands, or you may receive an electrical shock.
(2) Ground the printer for safety.
(3) Do not plug the printer into a multi-wiring connector in which other devices are
plugged into. It may overheat the outlet and may result in a fire.
(4) The outlet must satisfy the following rated power condition.
120V plus or minus 10%, 16A and 50/60Hz
2) There is a Power Switch (A) on the right-front of the printer.
Press "ON" to turn on the printer.
A
2-2
A
ON OFF
Chapter 2

Basic Operations