KIP STARPRINT 6000 User Giude page 23

(3) Roll Deck, roll width and roll material currently used
Before printing, you can select on the controller or on the scanner which roll media is used
for printing.
The Display of the Operation Panel indicates the selected Roll Deck Number and the
media width.
The Media Indicator indicates the media width, the material of the roll (Plain paper,
Vellum or Film) and the remaining volume of individual deck.
Roll 1 (Front Side)
Roll 2 (Rear Side)
Roll 3 (Front Side)
Roll 4 (Rear Side)
Example : Roll media in the Roll 1 is selected.
Roll Deck No. Paper Width
job
MENU
Other information:
Deck Width
1 36
2 34
3 30
4 24
Note: In case Roll of the deck is empty, far left
turns red while other 3 LEDs turn off.
TONER REMAIN IMAGE DENSITY
ENTER TEST
Material Remaining
Plain Full
Vellum 1/4
Plain 2/4
Plain Empty
1-16
Operation Panel
Media Indicator
It lights
orange.
In case of "No Paper",
this LED lights red.
PAPER TRIM
DECK
WIDTH MEDIA
PLAIN PAPAR
1 VELLUM /
TRACING
FILM
PLAIN PAPAR
2
VELLUM /
TRACING
FILM
PLAIN PAPAR
3
VELLUM /
TRACING
FILM
PLAIN PAPAR
4
VELLUM /
TRACING
FILM
Chapter 1 Before Use