KIP STARPRINT 6000 User Giude page 35

NOTE
(1) Image may be removed from the sides of the print if you select a narrower size on the
Paper Width Selector than the actual roll media width.
If you select a narrower size than the installed width, the interior of the printer will
become dirty with toner.
And if you select a wider size than the installed width, the margin on both sides will
become wider.
Please set this correctly when installing a new roll of media.
Printout with a proper setting
(2) Each material type has the best temperature for fusing to fix the toner.
The printer controls the temperature based on the setting on the Media Selector.
The toner may easily removed from the media if you make a wrong media
selection and incorrect media information is sent to the scanner and controller.
Please set media information correctly when you install a new roll.
Wrong setting (Narrow)
Wrong setting (Wide)
2-12 Chapter 2 Basic Operations