Turning On The Printer - KIP 7970 Series Hardware Operation Manual

2. 1

Turning on the Printer

1. Plug the power cord for Printer into a dedicated wall outlet.
WARNING
(1) Do not handle the Power Plug with wet hands, or you may receive an electrical shock.
(2) Ground the printer for safety.
(3) Do not plug the printer into a multi-wiring connector in which other devices are plugged
into. It may overheat the outlet and may result in a fire.
(4) The OUTLET must satisfy the following rated power condition.
220V to 240V plus 6% or minus 10%, 50/60Hz, 16A or higher
2. There is Power Switch on the right-front of the printer.
Press " " side to turn on the printer.
Press this side.
2-2 Chapter 2 Basic Operations