Power Supply - Gigaset S820A User Manual

Connecting the base with the phone network and the mains

power supply

3
2
Please note:
u
The power adapter must always be connected, as the phone will not operate without a
power supply.
u
Only use the power adapter and phone cord supplied. Pin connections on telephone cables
can vary (pin connections,
Wall mounting the base (optional)
Approx.
2 mm
Connecting the charger (if included)
2
4
1
¢
page 77).
¤
Connect the flat plug to the charger cradle
¤
Plug the power adapter into the plug socket
4
If you have to remove the plug from the charger again:
¤
Disconnect the power adapter from the mains
1
power supply.
¤
Press the release button
plug
3
¤
Plug the telephone cable into the con-
nection socket
base until it clicks into place; then push
the cable into the clips.
¤
Plug the power adapter cable into the
socket 2 on the back of the base and
twist the angle plug underneath the
cable clips.
¤
First, connect the power adapter
¤
Then connect the phone jack
50 mm
3
.
4
Getting started
1 on the back of the
3
4 .
1 .
2
and disconnect the
.
.
7