Multiple Handsets - Gigaset S820A User Manual

Multiple handsets

Multiple handsets
Registering handsets
You can register up to six handsets to your base. You must initiate registration of the handset on
both the base and on the handset. Both must occur within 60 seconds.
¤
On the base: Press and hold (at least 3 seconds) the registration/paging key.
¤
On the S820H handset (for other handsets see "Notes"):
¤
Touch Register 
or
Menu key v
This creates a connection to the base, but it may take some time.
¤
If necessary, enter the system PIN (default: 0000)
Successful registration is shown on the display. Adjust the handset's setting using the Settings
¢
menu item ( page 10).
Please note
u
If six handsets are already registered with the base (all internal numbers occupied) then
the most recently registered handset (e.g., INT 6) is replaced by the new handset. If this
attempt is not successful, e.g., because this handset does not have a connection to the
base, the message No free internal number is displayed.
In this case, de-register another handset that is no longer required and repeat the regis-
tration procedure.
u
You should start the registration procedure for other Gigaset handsets and handsets of
other GAP-enabled devices in accordance with the respective operating instructions.
Using the handset on multiple bases
Your handset can be registered on up to four bases. 
The active base is the last one your handset was registered with. The other bases are stored in
the list of available bases.
You can change the allocation to a base manually at any time. Alternatively, you can set the
handset so that it selects the base with the best reception (Best Base) as soon as the connection
to the current base is lost.
¤
Menu key v
Settings menu page
¤
Touch the selection icon for the desired base or touch Best Base ( ´ = selected)
Changing a base name or deleting a base
¤
Menu key v
Settings menu page
¤
Touch the name field for the desired base 
¤
Touch the name field and change the name
Or
¤
Delete Base
44
¤
Settings menu page
¤
É HS + Base
¤
É HS + Base
¤ ¤
É HS + Base Register
¤
Confirm the PIN with è.
¤
Connect to Base
¤
Connect to Base