Changing phone settings
The handset and base are preconfigured, but you can change the settings to suit your individual
requirements.
You can change settings either during a call or in idle status via the Settings menu page.
Changing the display language
Menu key v
¤
Settings menu page
¤
select the language ( ´ = selected)
Setting the country and your own area code
Menu key v
¤
Settings menu page
¤
¢
Next
page 12.
Setting the display on the handset
Setting the screensaver/Slideshow
You can define a screensaver for the display's idle status.
Choose between an analogue clock/digital clock/picture/
slideshow. You can load pictures onto your handset using
the Gigaset QuickSync software (
To show the idle display again, briefly press a or the
display.
¤
Menu key v
Settings menu page
¤
¤
g Display
Screensaver
-
Use the switch to activate/deactivate the screen-
saver.
-
Select the screensaver:
¤
¤
Selection
through the selection
back without saving.
Setting the display backlight
The display backlight lights up as soon as you press a key, touch the display or remove the hand-
set from the base/charger.
You can specify the period of time in idle status after which the display backlight is switched off.
If no period is set, the display is permanently dimmed.
¤
Menu key v
Settings menu page
-
Activate/deactivate the display backlight in or out of the charger.
-
Select Timeout.
Please note
The handset's standby time can be significantly reduced if the display backlight is activated.
¤
° Language and Location
¤
è
¤
° Language and Location
¢
page 61).
Use ê or ë in the header to browse
¤
Select or touch
¤
g Display
Activation
Selection
Analogue Clock
'
to go
¤
Backlight
Changing phone settings
¤
Display Language
Screensaver
on
L
33