Power Supply - Gigaset SL910A Setup & User Manual

Getting started
Connecting the base with the phone network and the mains

power supply

Base variant 1
2
3 3
Base variant 2
2
1
3
¤
Insert the phone cable (cable slightly flattened) into the right/lower connection socket
at the rear of the base until it clicks into place.
¤
Insert the power cable for the power adapter into the left/upper connection socket
¤
Insert both cables into the appropriate cable channels
¤
Base variant 1: Place the cover in the notches on the back of the base and click into place
(not if mounting on the wall).
¤
First connect the power adapter
Please note:
u
The power adapter must always be connected, as the phone will not operate without a
power supply.
u
Use only the power adapter and phone cord supplied. Pin connections on telephone cables
can vary (pin connections,
6
5
1
4
3
4 and then connect the telephone jack
£
page 89).
3a
4
5
3 .
1
.
2
3a
5