De-Registering Handsets; Locating A Handset (Paging); Changing The Base - Gigaset SX790 ISDN User Manual

Using multiple handsets
1) On the handset
The handset is not registered to a base.
§Register§
Press the display key.
The handset is already registered to a base:
v ¤ Ï ¤ Registration
¤ Register Handset
If the handset is already registered to four
bases:
s
Select base, e.g., Base 3 and
§OK§
press
~
If required, enter the system
PIN for the base and press
A message appears stating that the hand-
set is searching for a base that is ready for
registration.
2) On the base
Within 60 seconds, press and hold the reg-
istration/paging key on the base
(¢ page 2) (approx. 3 seconds).
Registering other handsets
You can register other Gigaset handsets and
handsets for other devices with GAP func-
tionality as follows.
1) On the handset
Start to register the handset as described
in its user guide.
2) On the base
Press and hold the registration/paging key
on the base (¢ page 2) (approx. 3 sec.).
60
.
§OK§

De-registering handsets

You can de-register any other registered
handset from any registered Gigaset S79H
handset.
v ¤ Ï ¤ Registration
¤ De-reg. Handset
s
Select the internal subscriber
you wish to de-register and
press
(The handset you are currently
using is highlighted with <.)
~
Enter the current system PIN
.
and press
§Yes§
Press the display key.

Locating a handset (paging)

You can locate your handset using the base.
¤ Briefly press the registration/paging key
on the base (¢ page 2).
¤ All handsets will ring at the same time
("paging"), even if the ringtones are
switched off.
Ending paging
¤ Briefly press the registration/paging key
on the base or press the talk key c on
the handset.

Changing the base

If your handset is registered to more than
one base, you can set it to a particular base
or to the base that has the best reception
(Best Base).
v ¤ Ï ¤ Registration ¤ Select Base
s
Select one of the registered
bases or Best Base and
press
§OK§
.
§Save§
.
§Select§
.