Installing The Base; Connecting The Base - Gigaset SX790 ISDN User Manual

Installing the base

The base is designed for use in closed, dry rooms with a temperature range of +5°C
to +45°C.
¤ Set up the base at a central point in the building on a level, non-slip surface or
mount the base on the wall (¢ page 87).
Please note
Pay attention to the range of the base.
This is up to 300 m in unobstructed outdoor areas and up to 50 m inside build-
ings. The range is reduced when Eco Mode is activated (¢ page 56).
The phone's feet do not usually leave any marks on surfaces. However, due to the
multitude of different varnishes and polishes used on today's furnishings, the
occurrence of marks on the surfaces cannot be completely ruled out.
Please note:
u Never expose the telephone to the influence of heat sources, direct sunlight or
other electrical devices.
u Protect your Gigaset from moisture, dust, corrosive liquids and fumes.

Connecting the base

¤ First, connect the
telephone jack
and insert the cables
into the cable ducts.
¤ Then connect the
power adapter 2.
Please note:
u The power adapter must always be connected, as the phone will not operate
without a mains connection.
u Use only the power adapter and phone cord supplied.
1
1
1
First steps
2
1
9