Locating A Handset ("Paging"); De-Registering Handsets; Using Multiple Handsets; Making Internal Calls - Gigaset a400 Manual

f
When you press the
Please note
If calls are saved in the network mailbox, you will
receive a message if the appropriate settings
have been set (depending on your network pro-
vider).
Call list
Prerequisite: CLIP (¢ page 7)
Depending on the type of list set, the call list contains
(¢ page 15)
u Accepted calls
u Missed calls
Depending on the type of list set, all numbers of the
last 25 incoming calls are saved or just the missed
calls are saved.
The call list is displayed as follows:
CallsList 01+02
Number of new entries + number of old, read entries.
Opening the calls list
f
¤ CallsList 01+02 ¤ OK
The last incoming call is displayed.
q
If necessary, use to select another entry.
Using other functions
q
(Select entry) ¤ Menu
The following functions can be selected with
Delete Entry Delete current entry.
Copy to Dir. Copy an entry to the directory.
Date/Time Display date and time of call
(if set ¢ page 6).
Status New Call: new missed call.
Old Call: entry already read.
Answ.: call accepted.
Delete List Warning! All old and new entries
will be deleted.
Calling back a caller from the call list
f
¤ CallsList 01+02 ¤ OK ¤
Select the language:
0 (English), 1 (French), 2
The display shows
Saved
Assigning key 1 for speed dial to the
network mailbox
Simply press and hold key
you will be connected directly to the /network mail-
box.
See menu tree ¢ page 15.
key, all the lists are displayed.
s
q c
(Select entry) ¤
(Arabian).
.
1
on the handset and
9
Locating a handset (paging)
You can locate your handset using the base.
u Briefly press the registration/paging key on the
base (¢ page 1).
u All handsets will ring simultaneously (paging),
even if the ringer melodies are deactivated.
End paging: briefly press the registration/paging key
on the base station (¢ page 1) or the talk key
handset.
Registering handsets
You can register up to four handsets on your base.
Each additional handset must be registered with the
base for it to work properly!
1) On the handset
Menu ¤ Settings ¤ OK ¤ Handset ¤ OK
¤ Register HS ¤ OK ¤ Enter the base system PIN
(default setting: 0000) ¤ OK
flashes on the display.
Registering
2) On the base
Within 60 seconds of entering the system PIN,
press and (¢ page 1) hold the registration/paging
key (min. 3 seconds).
Registration takes approx. 1 minute.
Handsets are assigned the lowest available internal
number (1-4). If the internal numbers 1–4 are already
:
assigned to other devices, the number 4 is overwrit-
ten.

De-registering handsets

Menu ¤ Settings ¤ OK ¤ Handset ¤ OK
¤ De-register HS ¤ OK ¤
the base system PIN (default setting: 0000) ¤ OK
The selected handset is de-registered.

Using multiple handsets

Making internal calls

Internal calls are free calls to other handsets that are
registered to the same base.
To make a call to other handsets, press
u q
u ¤
(Select internal number of handset) or
¤
, the handset is called or
OK
u
u ¤ Call All ¤
tively you can also press and hold the control key
u
or press
To end the call, press the end call key
q
Select handset ¤ OK ¤ Enter
, all handsets are called (alterna-
OK
u
¤ ).
a
c
on a
.