Eco Dect - Gigaset SX790 ISDN User Manual

ECO DECT

ECO DECT
You are helping to protect the environment
with your Gigaset SX790 ISDN.
Reduced energy consumption
Your telephone has a power-saving adapter
plug and uses less power.
Reducing radiation
The radiation from your telephone is
reduced automatically:
u Handset: The closer the handset is to the
base, the lower the radiation.
u Base: The radiation is reduced to virtually
zero when only one handset is registered
and the handset is placed in the base.
You can further reduce the radiation from
the handset and base by using Eco Mode:
u Eco Mode
Reduces the radiation of the base and
handset by 80% - whether you are mak-
ing a call or not. Eco Mode reduces the
range of the base by approx. 50%. Using
Eco Mode always makes sense when a
reduced range is sufficient.
Switching off radiation
u Eco Mode+
When you activate Eco Mode+, the radia-
tion (DECT transmission power) from the
base and handset is deactivated in idle
status. This is also true when multiple
handsets are used, if the handsets sup-
port Eco Mode+.
Eco Mode / Eco Mode+ can be activated/
deactivated independently of one another
and can also be used with multiple handsets.
The handset does not need to be placed in
the base.
56
Activate/deactivate Eco Mode /
Eco Mode+:
v ¤ Ï ¤ Eco Mode
¤ Eco Mode / Eco Mode+
§Change§
Press display key (³= on).
Status displays
Display icon
Reception strength:
Ð i Ñ Ò
– Good to poor
|
(flashes) – No reception
Ð
white Eco Mode deactivated
Ð
green Eco Mode activated
¼ white
Eco Mode+ activated
(displays instead of the
reception strength icon
when in idle status)
¼
green Eco Mode and Eco
Mode+ activated
Please note
u When using Eco Mode+, you can
ensure that the range of the base is
sufficient by pressing and holding
the talk key c. You hear the dial tone
if the base can be reached.
u When Eco Mode+ is enabled:
– Call setup is delayed by approx. 2
seconds.
– Handset standby time is reduced
by approx. 50%.
u Registering handsets that do not sup-
port Eco Mode+ causes the mode to
be deactivated on the base and all
other handsets.
u Activating Eco Mode reduces the
range of the base.
u Eco Mode / Eco Mode+ and repeater
support (¢ page 73) cancel each
other out, i.e., if you use a repeater,
you cannot use Eco Mode or Eco
Mode+.