Sms Messages To A Pabx; Activating/Deactivating The Sms Function - Gigaset SX790 ISDN User Manual

SMS messages to a PABX

u You can only receive an SMS when the
Calling Line Identification is forwarded
to the extension of the PABX (CLIP). The
CLIP evaluation of the SMS centre
number is completed in your Gigaset.
u Depending on your PABX, you may have
to add the access code (external line pre-
fix) before the number of the SMS centre.
If in doubt, test your PABX, e.g., by send-
ing an SMS to your own number: once
with and once without the access code.
u When you send SMS messages, your
sender number may be sent without your
extension number. In this case, the recip-
ient cannot reply to you directly.
Sending and receiving SMS messages on
ISDN PABXs is only possible via the MSN
number assigned to your base.
Sending SMS (text messages)
Activating/deactivating the
SMS function
If you deactivate the SMS function, you can-
not send or receive any SMS messages with
your phone.
The settings you have made for sending and
receiving SMS messages (e.g., the numbers
of the SMS service centres) and the entries in
the incoming and outgoing lists are saved
even after deactivation.
v
Open the main menu.
*#Q5# 2 L
Enter the digits.
Q
§OK§
Deactivate the SMS function.
Or:
§OK§
Activate the SMS function
(default setting).
53