Using Handsfree Mode; Muting; Ringback When Busy (Ccbs) / When The Call Is Not Answered (Ccnr) - Gigaset SX790 ISDN User Manual

Making calls
Have you ordered the calling line
display service from your network
provider?
¤ Check whether your provider supports
calling line display (CLIP) and that the
function has been activated for you. If
necessary, contact your provider.
Additional information on this subject can
be found on the Gigaset homepage at:
www.gigaset.com/service

Using handsfree mode

In handsfree mode, instead of holding the
handset to your ear you can put it down, for
example on the table in front of you. This
allows others to participate in the call.
Activating/deactivating speaker
mode
Activating while dialling
~ d
Enter the number and press the
handsfree key.
¤ Inform your caller before you use the
handsfree function so that the caller
knows a third party may be listening.
Switching between earpiece and
speaker mode
d
Press the handsfree key.
During a call, activate or deactivate hands-
free mode.
If you wish to place the handset in the base/
charger during a call:
¤ Press and hold the handsfree key d
while placing the handset in the base/
charger and for a further 2 seconds.
For instructions on adjusting the handsfree
volume, ¢ page 66.
Please note
If you have a headset connected, you can
switch between the headset and hands-
free mode.
34

Muting

You can deactivate the microphone in your
handset during an external call.
h
Press key to mute the handset.
The display shows Microphone
is off.
Press the key again to reactivate
the microphone.
Please note
u If the telephone is muted, all keys
except the mute key h and the
end-call key a will not work.
u A connected headset will also be
muted.
Ringback when busy (CCBS) /
when the call is not answered
(CCNR)
If the person you are calling does not answer
or their line is busy, you can initiate ringback.
Prerequisite: The exchange supports this
feature.
Activating ringback
§Ringback§
Press the display key and wait
for confirmation from the
exchange.
Time of the ringback:
u Ringback when busy – CCBS:
CCBS = Completion of calls to busy sub-
scriber. The ringback will take place as
soon as the subscriber in question termi-
nates the current call.
Ringback when there is no reply – CCNR:
CCNR = Completion of calls no reply. The
ringback will take place as soon as the
subscriber in question has made a call.