Gigaset SX790 ISDN User Manual page 64

Table of Contents

Advertisement

If you deactivate then reactivate the hand-
set, the room monitor remains activated.
Caution!
u Always check the operation of the
room monitor before use. For exam-
ple, test its sensitivity. Check the
connection if you are diverting the
room monitor to an external
number.
u When the function is switched on, the
handset's operating time is considera-
bly reduced. If necessary, place the
handset in the base/charger. This
ensures that the battery does not run
down.
u Ideally the handset should be posi-
tioned 1 to 2 metres away from the
baby. The microphone must be
directed towards the baby.
u The connection to which the room
monitor is diverted must not be
blocked by an activated answering
machine.
Activating the room monitor and
entering the destination number
v ¤ É ¤ Room Monitor
¤ You can enter data in the following fields:
Activation:
Select On to activate.
Alarm to:
Select Internal or External.
External number: Select the number
from the directory (press display key
or enter it manually.
Internal number: Select display key
¤ . Select handset or Call All to
§Change§
call all registered handsets ¤
In idle status, the destination number or
the internal destination number is dis-
played.
Sensitivity:
Select noise level sensitivity (Low or
High).
¤ Press
§Save§
to save the settings.
When the room monitor function is acti-
vated, the idle display appears as shown
below:
i
INT 1
OFF
Changing the set destination
number
v ¤ É ¤ Room Monitor
¤ Enter and save number as described in
Cancelling/deactivating the room
monitor
Press the end call key a to cancel the call
when the room monitor is activated.
In idle status, press the display key
deactivate room monitor mode.
Deactivating the room monitor
remotely
Prerequisites: The phone must support tone
dialling and the room monitor should be set
ö
for an external destination number.
)
¤ Accept the call from the room monitor
The room monitor function will deactivate
§OK§
.
after the call ends. There are no further room
monitor calls.
To reactivate the room monitor function
with the same phone number:
¤ Reactivate and save with
Using a handset as a room monitor
V
07:15
Á
22 Oct
Room Monitor
0891234567
Options
"Activating the room monitor and enter-
ing the destination number"
(¢ page 63).
and press keys 9 ;.
(¢ page 63).
§OFF§
to
§Save§
63

Advertisement

Table of Contents
loading

Table of Contents